Improve the hadnling of your 450/ Crossblade/ Roadster Model smart with this Coil Over Suspension Kit by Bilstein.
Utilizing Bilstein’s monotube shock absorber design for heat dissipation and ride control, this Coil-Over System adds a matched performance spring and threaded ride height adjuster to provide a complete suspension system for a your smart.
The gas shock absorbers offer nine precise compression and rebound settings. The front and rear progressive rate springs allow for the accurate adjustment of a vehicle's ride height, stance, cornering balance and ride quality to maximize performance.
About the Bilstein Shocks Included in this System
All Bilstein gas pressure struts/inserts and gas pressure shock absorbers operate on the same principle. They are manufactured with the rod pointing down into the strut tube, thereby utilizing the thicker, stouter body portion of the shock absorber to dissipate side loads. Consequently, due to the increased diameter and surface of the pressure tube, the Bilstein gas pressure strut/insert or shock is better suited to take increased side loads when compared with the conventional version.
Additional advantages, based on development strongly influenced by the motorsport industry, include greater stability, better road handling, and accurate steering. This combined with extremely high quality manufacturing and materials, means Bilsteins will last approximately four times as long as Original Equipment.
Battling Heat Build Up
Conventional shocks trap the heat within the shock body and prevent adequate dissipation, making them prone to heat build up, fade and eventual failure.
Bilstein's patented design allows the excessive heat from the oil to transfer to the outer surface of the shock body and dissipate more efficiently. The dividing piston also permits the oil to expand as heat builds, preventing aeration (foaming) and viscosity loss. This allows the shock to maintain full damping characteristics as temperatures rise.
The tube of a Bilstein gas pressure shock or strut is fabricated using a special extrusion method. This process achieves an extremely tight peak-to-valley tolerance and maintains consistent wall thickness. Bilstein's seamless monotube design provides superior tube strength while maximizing heat dissipation and shock life.
Ride Comfort and Performance Without Compromise
The piston head design allows independent tuning of the compression and rebound damping forces to provide optimum ride comfort and performance without compromise. It features fewer parts than most conventional designs. The product's simple, yet exceptionally functional digressive design contributes to the extreme durability and long life of Bilstein Shock Absorbers.
Bilstein's shock bodies are precision formed through a unique seamless extrusion process. This provides superior strength along with high finish tolerances. The shock body is then treated with a special paint finish durable enough to withstand grueling 240-hour salt spray tests. The finished body is mated with a solid, induction-hardened steel chrome plated and polished shaft, machined valving components and highest quality seals.
Available as a Special Order Item.
When August Bilstein laid the foundations for the innovation incubator BILSTEIN in Altenvoerde in Germany's Westphalia region in 1873, nobody had any idea of the crucial influence the company's products would one day have on the driving comfort and safety of cars. Instead it was metal window fittings - sold under the catchy name of AUBI, an abbreviation of August Bilstein - that soon made the company famous far beyond the boundaries of Bilstein's local region and even abroad.
A whole series of technical innovations followed and the revenues earned through these patents provided a solid basis for the later successes of what was still a young company. In order to meet the exacting quality demands already in the preliminary stage of manufacturing the fittings, the company set up its own strip iron rolling mill in 1919. In line with the motto "A rolling stone gathers no moss", Hans Bilstein, who had taken over the running of the company from his father, returned to his native Westphalia from the USA, which in the 1920s was still a long way away, bringing with him new concepts for nickel- and chrome-plating processes.
It was in 1927 that Hans Bilstein made the first move towards the automotive accessories industry, through his co-operation with the Berlin-based lifting gear company Levator-Hebezeug-Fabrik. He did not have to wait long to see his activities bear fruit.
In 1928, four years before the opening of the first motorway between Cologne and Bonn, BILSTEIN supplied the first chrome-plated bumper for mass-produced cars. Just one year later the company began producing car jacks. In typical BILSTEIN style, it entered this market with a resounding technical innovation, introducing the first usable side jack to a world that was only slowly getting used to the car. But the true world sensation was still to come.
In 1954, BILSTEIN was the first to realise the potential offered by an idea of Prof. Bourcier de Carbon, a French researcher in the field of vibrations. The aim was to eliminate the physical disadvantages of the conventional telescopic shock absorbers, whilst at the same time making the dampers lighter and able to be fitted in any position.
Enormous effort went into development, accompanied by substantial investment in the necessary production facilities, in order to achieve this ambitious target. And it paid off. The introduction of the first mono-tube gas pressure shock absorber in a standard production Mercedes-Benz vehicle in 1957 by what was at the time the 'Fittings and car jack manufacturer BILSTEIN' (Beschlag- und Wagenheber-Hersteller BILSTEIN) is still today considered a major contribution to active driving safety.
Gas pressure technology is now used in all types of telescope shock absorbers developed for use on powerful, high-class cars. The latest highlight is the development of the air spring module that BILSTEIN supplies 'just in sequence' to the Mercedes S-Class production line.
To this day, the demands of its customers in the automotive and tuning industries, combined with its commitment to motor sports, are what drive development and innovation at BILSTEIN. All AMG Mercedes in the DTM and over half of the teams in the 24 hour race on the Nürburgring approach the starting line with BILSTEIN accessories.
The name BILSTEIN has for many decades been closely associated with high tech in the field of suspension design, driving comfort and safety. In order to expand this position in the future, BILSTEIN became a division of ThyssenKrupp Technologies AG in 1988, and a wholly-owned subsidiary in 2005. The partnership and co-operation within the group will enable the company to continue to inspire with innovations in the traditional BILSTEIN way.